TP-Link Networking EAP770 Omada BE11000 Ceiling Mount Tri-Band Wi-Fi7 Access Point Retail
| Status: | Available |
| SKU: | 301960 |
| Vendor: | TP-Link |
| MPN: | EAP770 |
| UPC: | 840460603164 |
| EAN: | |
|
EAP770 BE11000 Ceiling Mount Tri-Band Wi-Fi 7 Access Point • BE11000 Tri-Band Wi-Fi 7: 5765 Mbps (6 GHz) + 4324 Mbps (5 GHz) + 688 Mbps (2.4 GHz). Buffering will no longer be a problem. note1 • 1× 2.5G Port: Unlock the full potential of Wi-Fi 7. • Clear 6 GHz Band: Brings cleaner and wider band resources to your Wi-Fi. • 320 MHz Bandwidth: Up to 320 MHz bandwidth enables many more simultaneous transmissions at the fastest possible speeds. note2 • Low Latency and Interference: Multi-Link Operation, and Multi-RUs ensure high performance of your network. note2 • Advanced Functions：Supports centralized management, Mesh, and Seamless Roaming. note3 Note 1. Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. The 320 MHz bandwidth is only available on the 6 GHz band. Simultaneously, the 320 MHz bandwidth on the 6 GHz band and 160 MHz bandwidth on the 5 GHz band may be unavailable in some regions/countries due to regulatory restrictions. Actual wireless data throughput, wireless coverage, and connected devices are not guaranteed and will vary as a result of internet service provider factors, network conditions, client limitations, and environmental factors, including building materials, obstacles, volume and density of traffic, and client location. 2. Use of Wi-Fi 7 (802.11be), Wi-Fi 6 (802.11ax), and features including Multi-Link Operation (MLO), 320 MHz Bandwidth, 6 GHz, 4K-QAM, Multi-RUs, OFDMA, and MU-MIMO requires clients to also support the corresponding features. 3. Omada Mesh, Seamless Roaming, Captive Portal, and Cloud Access require the use of an Omada controller. |
|
| HARDWARE FEATURES Interface 1x 2.5G Ethernet Port Button Reset Power Supply 802.3at PoE or 12V/2.5A DC Max. Power Consumption - 25.4 W (For PoE) - 21.8 W (For DC) Antenna - 2.4 GHz: 2x 4.0 dBi - 5 GHz: 2x 5.0 dBi - 6 GHz: 2x 5.0 dBi Bluetooth 1 x 4.0 dBi, Bluetooth 5.2 Note: Firmware update may be required. Mounting Ceiling / Wall /Junction Box Mounting (Kits Included) |
WIRELESS FEATURES Coverage 1500 ft2 (140m2) note5 Concurrent Clients 380+note4 Wireless Standards IEEE 802.11 a/b/g/n/ac/ax/be Frequency 6 GHz, 5 GHz, and 2.4 GHz Signal Rate 688 Mbps (2.4 GHz) + 4324 Mbps (5 GHz) + 5765 Mbps (6 GHz) note1 Wireless Functions - MLOnote2 - 4K-QAMnote2 - MU-MIMOnote2 - 320 MHz Bandwidthnote2 - Meshnote3 - Seamless Roaming(802.11k/v/r) note3 - BBS Coloringnote2 - OFDMAnote2 - Load Balance - Band Steering - Beamforming - Airtime Fairness - Multiple SSIDS:24(8 on each band) - Wireless Schedule - Reboot Schedule - QoS(WMM) - Rate Limit - Static IP/Dynamic IP - RADIUS Accounting - MAC Authentication Wireless Security - Captive Portal Authenticationnote3 - Access Control - Maximum number of MAC Filter: 4,000 - Wireless Isolation Between Clients - VLAN - Rogue AP Detection - WPA-Personal/Enterprise, WPA2-Personal/Enterprise, WPA3-Personal/Enterprise Transmission Power < 25dBm (2.4GHz) < 25dBm (5GHz) < 23dBm (6GHz) |