TP-Link Networking EAP787 Omada BE15000 Ceiling Mount Tri-Band Wi-Fi7 Access Point Retail
| Status: | Available |
| SKU: | 301958 |
| Vendor: | TP-Link |
| MPN: | EAP787 |
| UPC: | 840460600231 |
| EAN: | |
|
EAP787 BE15000 Ceiling Mount Tri-Band Wi-Fi 7 Access Point • Dedicated RF Scanning: Offers real-time spectrum monitoring and dynamic interference avoidance for robust wireless performance. note1 • Maximized 6 GHz Coverage with AFC: Unlock stronger signals and extended 6 GHz range performance (AFC enabled via firmware update, planned for April, 2026). note2 • Tri-Band 8-Stream Wi-Fi 7: 5765 Mbps on 6 GHz, 8648 Mbps on 5 GHz, and 688 Mbps on 2.4 GHz. note3 • 1× 10G Port: Ensures fast connectivity throughout the network • Low Latency and Interference: 320MHz Bandwidth, Multi-Link Operation, Multi-RUs, and 4K-QAM ensure high performance for your network. note4 Note 1. Dedicated RF Scanning requires the use of an Omada controller (V6.0 or above). 2. AFC availability varies by region or country. For supported areas, please visit: https://www.omadanetworks.com/support/faq/4373/ 3. Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. The 320 MHz bandwidth is only available on the 6 GHz band. Simultaneously, the 160 MHz and 240 MHz bandwidths or the 320 MHz bandwidth might not be available on the 5 GHz band or the 6 GHz band, respectively, in some regions/countries due to regulatory restrictions. Actual wireless data throughput, wireless coverage, and connected devices are not guaranteed and will vary as a result of internet service provider factors, network conditions, client limitations, and environmental factors, including building materials, obstacles, volume and density of traffic, and client location. 4. Use of Wi-Fi 7 (802.11be), Wi-Fi 6 (802.11ax), and features including Multi-Link Operation (MLO), 320 MHz Bandwidth, 240 MHz Bandwidth, 160 MHz Bandwidth, 6 GHz, 4K-QAM, Multi-RUs, OFDMA, and MU-MIMO requires clients to also support the corresponding features. |
|
| HARDWARE FEATURES Interface 1x 10G/2.5G Ethernet Port Button Reset Power Supply - 802.3bt/at PoE - 12V/2.5A DC Note: DC Power adapter is not included. DC power interface: 12V, accepts 2.1 mm / 5.5 mm center-positive circular plug with 9 mm length. Max. Power Consumption - 29 W (For PoE), - 24.5W (For DC) Antenna - 2.4 GHz: 2x 4.0 dBi - 5 GHz: 4x 5.0 dBi - 6 GHz: 2x 5.0 dBi Bluetooth 1 x 5 dBi (peak gain), Internal antenna module Note: Firmware update may be required. Mounting Ceiling / Wall / Junction Box Mounting (Kits Included) |
WIRELESS FEATURES Coverage 2050 ft2 (190 m2)note6 Concurrent Clients 510+note7 Wireless Standards IEEE 802.11 a/b/g/n/ac/ax/be Frequency 6 GHz, 5 GHz, and 2.4 GHz Signal Rate 688 Mbps (2.4 GHz) + 8648 Mbps (5 GHz) + 5765 Mbps (6 GHz) note3 Wireless Functions - 320 MHz Bandwidthnote4 - MLOnote4 - 4K-QAMnote4 - Multi-RUsnote4 - Seamless Roaming(802.11k/v/r) - MU-MIMOnote4 - Meshnote5 - BSS Coloringnote4 - OFDMAnote4 - Load Balance - Band Steering - Beamforming - Airtime Fairness - Multiple SSIDS:24(8 on each band) - Wireless Schedule - Reboot Schedule - QoS(WMM) - Rate Limit - Static IP/Dynamic IP - RADIUS Accounting - MAC Authentication Wireless Security - Captive Portal Authenticationnote5 - Access Control - Mac Filter - Wireless Isolation Between Clients - VLAN - Rogue AP Detection - WPA-Personal/Enterprise, WPA2-Personal/Enterprise, WPA3-Personal/Enterprise Transmission Power 4-25 dBm (2.4 GHz) 7-29 dBm (5 GHz, U-NII-1 and U-NII-3) 7-26 dBm (5 GHz, U-NII-2A) 7-24 dBm (5 GHz, U-NII-2C) 4-23 dBm (6 GHz) |