TP-Link Networking EAP725-Wall BE5000 Wall-Plate Dual-Band Wi-Fi 7 Access Point Retail
| Status: | Available |
| SKU: | 298209 |
| Vendor: | TP-Link |
| MPN: | EAP725-WALL |
| UPC: | 810142823173 |
| EAN: | |
|
EAP725-Wall BE5000 Wall Plate Wi-Fi 7 Access Point • BE5000 Wi-Fi 7 (4324 Mbps on 5 GHz + 688 Mbps on 2.4 GHz). note1 • 1x 2.5G PoE input port + 1x 2.5G pass-through port + 2x Gigabit RJ45 downlink ports. • 240 MHz bandwidth enables many more simultaneous transmissions. note2 • MLO and Multi-RUs ensure the high performance of your network. note2 • Advanced Functions: Centralized management, Mesh, and Seamless Roaming. note5 Note: 1. Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. The 240 MHz and 160 MHz bandwidth is only available on the 5GHz band. It may be unavailable in some regions/countries due to regulatory restrictions.Actual wireless data throughput, wireless coverage, and connected devices are not guaranteed and will vary as a result of internet service provider factors, network conditions, client limitations, and environmental factors, including building materials, obstacles, volume and density of traffic, and client location. 2. Use of Wi-Fi 7 (802.11be) and features including 240 MHz Bandwidth, 4K-QAM, Multi-RUs, OFDMA and MU-MIMO requires clients to also support the corresponding features. 5. Omada Mesh, Seamless Roaming, Captive Portal, and Cloud Access require the use of an Omada SDN controller. Please refer to the User Guides of Omada SDN controllers for configuration methods. |
|
| HARDWARE FEATURES Interface - Uplink: 1x 2.5G Ethernet Port - Downlink: 1x 2.5G Ethernet Port + 2x Gigabit Ethernet Ports (The 2.5G port supports PoE pass-through. The PoE pass-through feature requires 802.3at/bt input. If the power consumption of the APs downstream device exceeds 7W, the AP needs an 802.3bt input.) Physical Security Lock No Button Reset, LED Power Supply 802.3at/bt PoE Max. Power Consumption - 802.3bt: 17W (PoE Out support 15.4W) - 802.3at: 17W (PoE Out support 7W) Antenna 4x Internal Antennas - 2.4 GHz: 2x 4 dBi - 5 GHz: 2x 5 dBi Bluetooth V5.2 Mounting Wall Mounting (Kits included) |
WIRELESS FEATURES Coverage 50m2 (600 ft2)note4 Concurrent Clients 250+note3 Wireless Standards IEEE 802.11 a/b/g/n/ac/ax/be Frequency 2.4 GHz and 5 GHz Signal Rate - 5 GHz: Up to 4324 Mbps - 2.4 GHz: Up to 688 Mbps Wireless Functions - MLOnote2 - 4K-QAMnote2 - Multi-RUsnote2 - 240 MHz Bandwidthnote2 - 16 SSIDs (Up to 8 SSIDs on each band) - Enable/Disable Wireless Radio - Automatic Channel Assignment - Transmit Power Control (Adjust Transmit Power on dBm) - QoS(WMM) - Seamless Roamingnote5 - Beamforming - Rate Limit (Based on SSID/Client) - Load Balance - Airtime Fairness - Band Steering - Reboot Schedule - Wireless Schedule - RADIUS Accounting - MAC Authentication - Wireless Statistics - Static IP/Dynamic IP Wireless Security - Captive Portal Authenticationnote5 - Access Control - Wireless Mac Address Filtering - Wireless Isolation Between Clients - VLAN - Rogue AP Detection - WPA-Personal/Enterprise, WPA2-Personal/Enterprise, WPA3-Personal/Enterprise Transmission Power < 22 dBm (2.4 GHz) < 22 dBm (5 GHz, band 1 and band 2 and band 3 and band 4) |