Areca Controller Card ARC-1886-6N2I PCIe Gen 4.0 M.2 NVMe Hardware RAID controller Brown Box
| Status: | Available |
| SKU: | 257791 |
| Vendor: | Areca Technology Corporation |
| MPN: | ARC-1886-6N2I |
| UPC: | |
| EAN: | |
|
Highlights • Controller-level hardware encryption • SED support for encryption capable drives • Support up to 256 SATA or SAS devices using SAS expanders • Firmware automatically backup from NVMe RAID to SAS/SATA RAID • Device interface PCIe Gen4 NVMe / 6Gb/s SATA per M.2 slot • PCIe 4.0 host interface, PCIe Gen4 x8 lanes at maximum transfer rate up to 128Gb/s • Supports up to 4/6 x PCIe Gen 4.0 M.2 slots and 1x SFF-8654[x8] / 2 x SATA connector • CBM module or on-board battery(CR2032) to keep on M.2 fault LED status for troubleshooting • Hardware-based RAID solution that supports RAID levels 0, 1, 10, 3, 5, 6, Single Disk and JBOD • Implemented 8GB 72-bit DDR4-2666 SDRAM providing hardware RAID assist engine for parity calculations • Dynamically allocate storage 12Gb/s SAS/SATA/PCIe (NVMe) to NVMe slot1 and SATA/SAS ports on ARC-1886-6N2I • Support off module power loss protection (PLP) saves data issued without data loss at power fail using optional CBM module PCIe Gen 4.0 M.2 NVMe Hardware RAID controller The ARC-1886-xNxI presents the advanced hardware RAID technology in enhanced performance of using 6 Bays M.2 NVMe and an improved enterprise data protection of using two SAS/SATA ports. The hardware RAID adapter accesses the data of NVMe disk array with a workload preset value. While the workload level stays within the preset value, the RAID adapter would constantly back up the data of NVMe disk array to the other two SAS/SATA ports hard disk arrays. This is designed in a 1.6 GHz dual-core ROC processor, DDR4-2666 memory and PCIe Gen 4.0 host/device interface and supports RAID levels 0, 1, 10, 3, 5, 6, Single Disk or JBOD. |
|
| PCIe Gen 4.0 M.2 NVMe Hardware RAID controller |
Form Factor 107.2(H) x 262(L) mm |