Edgecore Switch 5835-54X-O-AC-F-US AS5835-54X 48Port 10GbE SFP+ 6x100G QSFP28 Retail
| Status: | Available |
| SKU: | 246032 |
| Vendor: | Edgecore Networks |
| MPN: | 5835-54X-O-AC-F-US |
| UPC: | |
| EAN: | |
|
The Edgecore DCS201 switch meets the high-performance, availability, and network-scaling requirements of enterprise and cloud data centers. The DCS201 provides full line-rate switching at Layer 2 or Layer 3 across 48 x 10GbE ports and 6 x 100GbE uplinks. The switch can be deployed either as a Top-of-Rack switch, or as part of a 40GbE or 100GbE distributed spine, forming a non-blocking folded-Clos data center fabric. The switch is rack mountable in a standard 19-inch rack. The DCS201 hardware provides the high availability features required for data center operation, including: Redundant, hot-swappable AC or -48 VDC PSUs, 4+1 redundant fan modules, and port-to-power or power-to-port airflow options. The DCS201 is an ideal Top-of-Rack switch for virtualized data centers with support for VXLAN and NVGRE tunneling functions in hardware. This open network switch is loaded with the Open Network Install Environment (ONIE), which supports the installation of compatible Network Operating System soſtware, including the open source options, plus commercial NOS offerings. Key Features and Benefits • Cost-effective, open network switch for data center fabric. • 48 x SFP+ switch ports, supporting 10GbE (DAC, 10GBASE-SR/LR) or 1GbE (1000BASE-T/SX/LX). • 6 x 100 QSFP28 switch ports, each supporting 100GbE (DAC, 100GBASE SR4/LR4) or 4 x 25GbE (DAC or fiber breakout cable). • VXLAN and NVGRE tunneling support in hardware for network virtualization. • Rack mountable in standard 19" racks. • Supports hot/cold aisles with port-to-power and power-to-port airflow SKUs. • All ports on front; PSUs, fan modules on rear. • Hot-swappable, load sharing, redundant AC or -48 VDC PSUs. • Hot swappable 4+1 redundant fan modules. • Management: Ethernet and console RJ-45 ports; USB storage port. |
|
| Ports Switch Ports: 48 x SFP+ each supporting 10GbE or 1GbE 6 x QSFP28 each supporting 100GbE or 4 x 25GbE Note: When a DAC cable is used in a topology, a link issue may be encountered if the CR4 Auto-Negotiation/Link Training does not turn on. This can be solved by manually enabling CR4 Auto Negotiation/Link Training. Note: Due to a chip limitation, only two QSFP28 ports can support breakout modes at the same time. Ports 49 to 51 and 52 to 54 can only have one port in breakout mode. Currently, the default ports are 51 and 54, which can be changed according to user preference. |
Management Ports on Front Panel: 1 x RJ-45 serial console 1 x RJ-45 100/1000BASE-T management 1 x USB Type A storage port |